Rope Access Equipment

The AVAO BOD FAST fall-arrest, work-positioning and suspension harness is designed for greater comfort in all situations. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. The shoulder straps have a parking system for the fall-arrest lanyard connectors, keeping them within reach. The DOUBLEBACK self-locking buckles at the rear of the harness, between the waistbelt and the leg loops, allow for a shorter adjustment when the dorsal attachment point is used. The harness also makes it easier to carry and organize work tools, with multiple gear loops and slots for attaching CARITOOL tool holders and TOOLBAG tool pouches. The harness is fastened with a SCREW-LOCK manual locking carabiner and is certified to European. The AVAO BOD FAST features leg loops with FAST LT buckles.

Specifications:

• Available in Sizes: 0, 1 & 2
• Ventral attachment point: Attachment for a descender or a positioning lanyard for use in single mode
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Sternal attachment point: Fall-arrest system attachment
• Dorsal attachment point: Fall-arrest system attachment
• Rear attachment point on the waistbelt: Restraint lanyard attachment
• Certification(s): CE EN 361, CE EN 358, CE EN 813, UKCA, EAC, JSFAD
• Material(s): Nylon, polyester, aluminum, steel

The AVAO SIT FAST work positioning and suspension seat harness is designed for greater comfort in a variety of situations. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. The harness also makes it easier to carry and organize work tools, with multiple gear loops and slots for attaching CARITOOL tool holders and TOOLBAG tool pouches. This seat harness is designed to be converted into a fall-arrest harness when combined with a TOP chest harness, or into a rope access harness when combined with a TOP CROLL S or L chest harness. The AVAO SIT FAST features leg loops with FAST LT buckles.

Specifications:

• Available in Sizes: 1 & 2
• Ventral attachment point: Attachment for a descender or a positioning lanyard for use in single mode
• Lateral attachment points: Attachment for a positioning lanyard for use in double mode
• Rear attachment point on the waistbelt: Restraint lanyard attachment
• Certification(s): CE EN 358, CE EN 813, UKCA, EAC
• Material(s): Nylon, polyester, aluminum, steel

Chest harness for seat harness, with integrated CROLL L ventral rope clamp.The TOP CROLL L integrates a CROLL L ventral rope clamp to transform the ASTRO SIT FAST, AVAO SIT, AVAO SIT FAST, FALCON, FALCON ASCENT and SEQUOIA SRT seat harnesses into rope access harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. When the waistbelt is loaded, they help distribute the load over the shoulders.

Specifications:

• Integrates a CROLL L ventral rope clamp to transform the ASTRO SIT FAST, AVAO SIT, AVAO SIT FAST, FALCON, FALCON ASCENT and SEQUOIA SRT harnesses into rope access harnesses
• Connects to the rear loop and directly to the openable ventral attachment point of the ASTRO SIT FAST harness or with a connector to the AVAO SIT, AVAO SIT FAST, FALCON, FALCON ASCENT and SEQUOIA SRT harnesses
• Foam shoulder straps are widely spaced to reduce neck chafing. When the waistbelt is loaded, they help distribute the load over the shoulders.
• Shoulder straps equipped with self-locking DOUBLEBACK PLUS buckles for quick and easy adjustment
• Certification(s): CE EN 361 (with ASTRO SIT FAST, AVAO SIT, AVAO SIT FAST, FALCON, FALCON ASCENT, SEQUOIA SRT seat harness), CE EN 12841 type B, UKCA (with ASTRO SIT FAST, AVAO SIT, AVAO SIT FAST, FALCON, FALCON ASCENT, SEQUOIA SRT seat harness), JSFAD (with AVAO SIT, AVAO SIT FAST, FALCON, FALCON MOUNTAIN, SEQUOIA SRT seat harnesses), EAC
• Material(s): nylon, polyester, aluminum, steel

Self-braking descender with anti-panic function for work at height and rope access work. The self-braking I'D S descender is primarily designed for work at height and rope access work. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to easily position themselves at a workstation without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. I'D S is compatible with 10 to 11.5 mm ropes and allows handling of loads up to 250 kg.

Specifications:

• Material(s): aluminum, steel, nylon
• Weight: 600 g
• Maximum working load for one person: 150 kg
• Maximum working load for two persons (rescue): 250 kg
• Certification(s): EN 341 type 2 class A, CE EN 12841 type C, CE EN 15151-1, ANSI Z359.4, NFPA 2500 Technical Use, UKCA, EAC, GB/T 38230 II A, XF494 - FZL-X-Q10/11.5
• Rope compatibility: 10 to 11.5 mm diameter

Self-braking descender with anti-panic function for rescue. The I'D L self-braking descender is primarily designed for rescue. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to position themselves without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. I'D L is compatible with 12.5 to 13 mm ropes and allows handling of loads up to 280 kg.

Specifications:

• Material(s): aluminum, steel, nylon
• Weight: 600 g
• Maximum working load for one person: 150 kg
• Maximum working load for two persons (rescue): 250 kg
• Certification(s): EN 341 type 2 class A, CE EN 12841 type C, ANSI Z359.4, NFPA 2500 General Use, UKCA, EAC
• Rope compatibility: 12.5 to 13 mm diameter

Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropes MAESTRO S is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated brake allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling efficiency. The AUTO-LOCK system automatically locks the rope when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle. The MAESTRO S descender is compatible with 10.5 to 11.5 mm ropes and allows handling of loads up to 250 kg.

Specifications:

• Material(s): aluminum, stainless steel, nylon
• Weight: 1100 g
• Min. rope diameter: 10.5 mm
• Max. rope diameter: 11,5 mm
• Sheave type: faceted, on sealed ball bearings
• Maximum working load: 250 kg
• Breaking strength: 18 kN x 2 = 36 kN
• Efficiency: 86 %
• Certifications: CE EN 12841 type C, EN 341, NFPA 2500 Technical Use, EAC

Compact self-braking descender for rope access, designed for experienced users. RIG is a compact self-braking descender for rope access, designed for experienced users. It has an ergonomic handle that allows comfortable descent control. The AUTO-LOCK system allows users to easily position themselves at the work station without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness.

Specifications:

• Material(s): aluminum, stainless steel, nylon
• Weight: 1100 g
• Min. rope diameter: 10.5mm
• Max. rope diameter: 11.5mm
• Sheave type: faceted, on sealed ball bearings
• Maximum working load: 250kg
• Breaking strength: 18kN x 2 = 36kN
• Efficiency: 86%
• Certifications: CE EN 12841 type C, EN 341, NFPA 2500 Technical Use, EAC

The ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the fall arrester locks on the rope and stops the user. The integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. The connection arm makes the system drop-resistant when passing intermediate anchors. The ASAP LOCK is used with an ASAP'SORBER or ASAP'SORBER AXESS energy absorber to work at a distance from the rope.

Specifications:

• Material(s): aluminum, stainless steel, nylon
• Weight: 425 g
• Certification(s): CE EN 12841 type A when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 10-13 mm EN 1891 type A rope
• Certification(s): CE EN 353-2, GB/T 24537-2009 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber and an AXIS 11 mm rope with sewn termination or ASAP AXIS 11 mm or PARALLEL 10.5 mm with sewn termination
• Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination
• Certification(s): EAC when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 10-13 mm EN 1891 type A rope
• Certification(s): UKCA, XF 494-2004: FZL-Z-Q10/13

The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.

Specifications:

• Material(s): nylon, polyester
• Certification(s): CE EN 355, ANSI Z359.13 6 feet, UKCA, EAC, GB/T 24538-2009 : 型 II
• May only be used with an ASAP or ASAP LOCK mobile fall arrester

The ASAP’SORBER AXESS energy absorber may only be used with the ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. In can be used in two-person rescue situations for a maximum load of 250 kg.

Specifications:

• Material(s): nylon, polyester
• Certification(s): CE EN 355, ANSI Z359.13 6 feet

The ASCENSION handled rope clamp is designed for rope ascents and features an overmolded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. The ASCENSION handled rope clamp has a wide lower hole for easily attaching two carabiners for a lanyard and footloop.

Specifications:

• Material(s): aluminum, stainless steel, plastic, rubber, nylon
• Weight: 165 g
• Rope compatibility: 8 to 13 mm
• Certification(s): CE EN 567, CE EN 12841 type B, UKCA, EAC, NFPA 2500 Technical Use, XF 494

MICRO TRAXION is a compact and lightweight progress-capture pulley (85 g) designed for crevasse rescue, hauling, and self-rescue, and for use as an emergency ascender. The cam can be locked in the open position so the device can be used as a simple pulley. Sealed ball bearings provide excellent efficiency (91%)

Specifications:

• Weight: 85 g
• Certification(s): CE EN 567, UKCA, UIAA
• Min. rope diameter: 8 mm
• Max. rope diameter: 11 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 27mm
• Working load: 2 x 2.5 = 5 kN
• Breaking strength: 2 x 7,5 = 15 KN
• Working load as progress capture pulley: 2.5 kN
• Breaking strength as progress capture pulley: 4kN
• Efficiency: 91%

Possible to open, even when attached to the anchor, the PRO TRAXION progress-capture pulley is designed for setting up haul systems. With a large diameter sheave mounted on sealed ball bearings and excellent efficiency, it is particularly suitable for hauling heavy loads. The swivel makes it easier to operate, allowing the pulley to be oriented under load and for direct connection of carabiners, ropes, or slings.

Specifications:

• Weight: 295 g
• Certification(s): CE EN 567, CE EN 12278, CE EN 12841 type B, UKCA, NFPA 2500 Technical Use Pulley and Rope grab
• Min. rope diameter: 8 mm
• Max. rope diameter: 13 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 38mm
• Breaking strength - pulley: 11.5 kN x 2 = 23 kN
• Working load as progress capture pulley: 2.5 kN
• Breaking strength - rope clamp: 4 kN
• Efficiency: 95%

Versatile and compact, the FIXE pulley allows quick installation onto the rope.

Specifications:

• Rope compatibility: 7 to 13 mm
• Sheave diameter: 21 mm
• Ball bearings: no
• Efficiency: 71%
• Maximum working load: 2,5 kN x 2 = 5 kN
• Weight: 90 g
• Certification(s): CE EN 12278, UKCA

The PARTNER is an ultra compact, extremely lightweight pulley. It is designed for daily tasks and on-site rescue

Specifications:

• Rope compatibility: 7 to 11 mm
• Sheave diameter: 25 mm
• Ball bearings: Yes
• Efficiency: 91%
• Maximum working load: 2,5 kN x 2 = 5 kN
• Weight: 56 g
• Certification(s): CE EN 12278, UKCA

The very high efficiency RESCUE pulley is designed for intensive use by rescue professionals.

Specifications:

• Rope compatibility: 7 to 13 mm
• Sheave diameter: 38 mm
• Ball bearings: Yes
• Efficiency: 95%
• Maximum working load: 4 kN x 2 = 8 kN
• Weight: 185 g
• Certification(s): CE EN 12278, NFPA 2500 Technical Use, UKCA, XF 494: FZL-H-T 9.5/13

The very high efficiency RESCUE pulley is designed for intensive use by rescue professionals.

Specifications:

• Material(s): aluminum, stainless steel, nylon
• Weight: 260 g
• Certification(s): - CE EN 567, UKCA for use with 9 to 13 mm rope - XF 494: FZL-Z-Q for use with 9.5 to 13 mm rope
• Certification(s): CE EN 12841 type B, NFPA 2500 Technical Use, EAC for use with 10 to 13 mm rope

The lightweight OK carabiner is made of aluminum. It has an oval shape that allows optimal loading of devices with a wide cross-section, such as pulleys, rope clamps and mobile fall arresters. Its fluid interior design and Keylock system facilitate handling. It is available in three locking systems: automatic TRIACT-LOCK or BALL-LOCK system, or the manual SCREW-LOCK system. OK can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Specifications:

• Material(s): aluminum
• Certification(s): CE EN 362, EAC, UKCA
• Major Axis Strength - 25kN

Screw Gate Carabiners with Unique ID's Rated 25 KN

Specifications:

• Material(s): Steel
• Rated 25 KN
• Suitable for securing tools on Harness

VULCAN is a high-strength steel carabiner designed for use in difficult environments. The large-capacity asymmetrical shape is ideal for setting multiple anchors. The VULCAN carabiner is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system. VULCAN TRIACT-LOCK is available in European or international versions. VULCAN can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Specifications:

• Material(s): Steel
• TRIACT-LOCK: automatic locking with triple-action gate opening
• SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked
• Major Axis Strength: 45 kN

The Am’D lightweight asymmetrical carabiner is made of aluminum. It has a D shape particularly suited for connection to diverse equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling. The Am’D carabiner is available in three locking systems: automatic TRIACT-LOCK or BALL-LOCK system, or the manual SCREW-LOCK system. Am'D may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Specifications:

• Material(s): aluminum
• Certification(s): CE EN 362, EAC, NFPA 2500 Technical Use, UKCA
• Major Axis Strength - 27kN

The adjustable FOOTAPE foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. A height adjustable elastic keeps the foot in the loop, regardless of shoe type.

Specifications:

• Material(s): aluminum
• Certification(s): CE EN 362, EAC, NFPA 2500 Technical Use, UKCA

The LOOPING four-step etrier attaches to an ASCENSION rope clamp for rope ascents or directly onto an anchor for progression in overhangs.

Specifications:

• Material(s): nylon
• Weight: 145 g
• Color(s): black/yellow

The PODIUM provides optimal comfort during prolonged suspension. The wide sitting position offers excellent stability. Rigid sides prevent the webbing straps from cutting into the thighs. The easy-to-use seat has two equipment loops and a rear hook, making it easier to store in order to facilitate movement. It connects to ASTRO BOD FAST and ASTRO SIT FAST harnesses with two shackles.

Specifications:

• Suspension webbing is adjustable with self-locking DOUBLEBACK buckles
• Rear hook allows easy positioning of the seat on the back when not in use
• Weight: 1060 g

The PROTEC flexible protector is designed to protect a fixed rope from abrasion when working at height or during rescue. Easy to install and durable, it’s made for regular to intensive use. Versatile, PROTEC fits most rope diameters used by professionals, as well as anchor straps.

Specifications:

• Material(s): TPU, nylon, aluminum
• Weight: 130 g
• Dimensions: 56 x 5 x 2,5 cm

The canvas ROPE PROTECTOR is designed for situations where a localised area of rope protection from limited abrasion is required.The canvas ROPE PROTECTOR can be installed directly on the rope or secured to the structure using a combination of the attached cord and the hook and loop closures provided.

Specifications:

• Provides limited protection to non-moving ropes from light abrasion
• Secure installation using prusik type attachment
• Dual layer canvas construction
• Hook and loop closure
• Lightweight and compact
• Available in two lengths - 50cm & 100cm

Set up your own traceability system The Rope End Kit includes 50 items. It is composed of rot-proof, tear-proof and waterproof labels and heat-shrinkable sleeves that are very resistant to abrasion. It useful for replacing old ones, but especially for setting up your own material tracking system.

Specifications:

• Sport Product
• Professional Product
• Setup your tracking system to keep track of your rope

Headlamp for use in ATEX explosive environments, suitable for proximity lighting, movement and long-range vision. 100 lumens - The PIXA 3 headlamp is rugged and versatile. The multi-beam adapts to all situations: close-range work, movement, and long-range vision. CONSTANT LIGHTING technology: brightness does not decrease gradually as the batteries are drained. It meets ATEX zone 2/22 (II 3 GD Ex nA ic IIB T4 Gc tc IIIC T135°C Dc) certification requirements for work in explosive environments.

Specifications:

• Weight: 160 g
• Technology: CONSTANT LIGHTING
• Beam pattern: flood, mixed or focused
• Energy: 2 AA/LR06 batteries (included)
• Battery compatibility: rechargeable Ni-MH and lithium
• Watertightness: IP67 (waterproof to -1 meter for 30 minutes; no maintenance required after immersion)

The Edge Hog is a neat solution for protecting rope while it runs through a grating. It will fit through grating commonly found on oil rigs and many other industrial plants (know as Kennedy Grating) and allows the rope to be fed through the grating for rope access use. The device bolts securely in place with a 17mm spanner and is adjustable for different grating sizes. The whole thing is made of marine-grade stainless steel, providing excellent durability in an off-short environment. It also features two clip-in points for transportation.

Specifications:

• Marine Grade 316 Stainless Steel
• 70 x 150 x 150mm
• 715g
• Up to 2 Strands of 13mm Rope

Adjustable lanyard for work positioning - The GRILLON adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Depending on the configuration, it can be used in single or double mode. GRILLON is available in seven lengths (2, 3, 4, 5, 10, 15 and 20 m), and also in black. It is certified to North American, European and Russian standards.

Specifications:

• Material(s): nylon, polyester, aluminum
• Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC, UKCA, GB 24543 / WQX

Double lanyard with integrated energy absorber - ABSORBICA®-Y is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and for passing intermediate anchors. It functions with users weighing between 50 and 140 kg. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms to avoid hindering progression. Depending on the connectors used, ABSORBICA®-Y is certified to American, European, and Russian standards.

Specifications:

• Material(s): Polyester, nylon, high-modulus polyethylene
• Certification(s): CE EN 355 when used with EN 362, UKCA, EAC connectors (maximum certified mass: 100 kg), JSFAD, GB/T 24538-2009: 型 II, ANSI Z359.13 12 feet when used with ANSI Z359.12 connectors (maximum certified user weight: 140 kg)

Our Nylon 25mm Textile Slings are the workhorse of our textile anchor selection. Used throughout the work and rescue sectors, these slings enable anchors to be quickly created around a variety of natural and artificial features. The endless loop construction is manufactured from 25mm wide nylon webbing, sewn using a five bar computer controlled stitch pattern. Our webbing is specially selected to meet the strength, ease of handling and robustness required by professional users.

Specifications:

• BL: 30kN
• Conformity: CE EN 566, EN 795 type B (PD CEN/TS 16415)
• Rated to 30KN

Wire Anchor Strops are temporary transportable anchors for work at height and rescue purposes. They are manufactured from 7mm galvanised steel wire with swaged thimble eyes at each end and a transparent polyester reinforced PVC protective tubing over the wire. All our Wire Anchor Strops are CE marked and certified to EN795 B and also meet PD CEN/TS 16415:2013 for two person rescue loads.

Specifications:

• Galvanised steel wire and aluminium alloy ferrules
• Stainless steel thimble eye maintains shape and allows easy attachment
• Fitted transparent polyester reinforced PVC protective tubing
• Available in several lengths from 0.50m to 3m
• 'Non Standard' lengths are also available upto 25m. Please contact us for more information and a quote.
• Rated to 25KN
• PET 0037 - 1.0m Length
• PET 0008 - 1.5m Length
• PET 0039 - 2.0m Length

The VERTEX VENT helmet is very comfortable, thanks to its six-point textile suspension and CENTERFIT and FLIP&FIT systems, which guarantee that the helmet fits securely on the head. The adjustable-strength chinstrap makes it ideal for both work at height and on the ground. It has ventilation holes with sliding shutters to allow airflow through the helmet. With its potential for integration of a Petzl headlamp, hearing protection, and multiple accessories, it is an entirely modular helmet, thus responding to the specific additional needs of professionals.

Specifications:

• Head circumference: 53-63 cm
• Weight: 490 g
• Material(s): ABS (acrylonitrile butadiene styrene), nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492, ANSI Z89.1 Type I Class C, UKCA, EAC, GB 2811-2019

The VERTEX VENT helmet is very comfortable, thanks to its six-point textile suspension and CENTERFIT and FLIP&FIT systems, which guarantee that the helmet fits securely on the head. The adjustable-strength chinstrap makes it ideal for both work at height and on the ground. It has ventilation holes with sliding shutters to allow airflow through the helmet. With its potential for integration of a Petzl headlamp, hearing protection, and multiple accessories, it is an entirely modular helmet, thus responding to the specific additional needs of professionals.

Specifications:

• Head circumference: 53-63 cm
• Weight: 490 g
• Material(s): ABS (acrylonitrile butadiene styrene), nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492, ANSI Z89.1 Type I Class C, UKCA, EAC, GB 2811-2019

The VERTEX helmet is very comfortable, thanks to its six-point textile suspension and CENTERFIT and FLIP&FIT systems, which guarantee that the helmet fits securely on the head. The adjustable-strength chinstrap makes it ideal for both work at height and on the ground. The unventilated outer shell protects against electrical hazards, molten metal splash and flames. With its potential for integration of a Petzl headlamp, hearing protection, and multiple accessories, it is an entirely modular helmet, thus meeting the specific additional needs of professionals.

Specifications:

• Head circumference: 53-63 cm
• Weight: 490 g
• Material(s): ABS (acrylonitrile butadiene styrene), nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492 (1), EN 50365, ANSI Z89.1 Type I Class E, EAC, UKCA, AS/NZS 1801, GB 2811-2019
• (1) meets all requirements of the EN 12492 standard, except the ventilation requirement

Designed for regular to intensive use, TRANSPORT 45 is a comfortable and durable pack. The back panel, shoulder straps, and waistbelt are padded with thermoformed foam to optimize comfort, even when carrying heavy loads. It is constructed with high-strength TPU tarp material to withstand intensive use without premature wear. With a practical, freestanding design, it can also be hauled, hung open at a workstation, or carried using one of the three durable handles.

Specifications:

• Volume: 45 liters
• Weight: 1530 g
• Height: 58 cm
• Maximum load: 50 kg
• Material(s): Nylon, polyester, polyurethane, polypropylene

Designed to be carried in multiple ways, DUFFEL 85 is a convenient, ergonomic bag with a volume of 85 liters. The back and shoulder straps are padded for comfort when used as a backpack. Versatile, it can be carried in multiple ways with removable shoulder straps. The large opening allows easy access to equipment, including two pockets in the inner flap and a large side pocket for a helmet or shoes. A large transparent area allows rapid identification of the bag. It is constructed of high-strength TPU tarp material for intensive use. Available in two colors: yellow/black and black.

Specifications:

• Weight: 1550 g
• Dimensions: 70 x 40 x 32 cm
• Recommended working load: 35 kg
• Maximum load: 70 kg
• Material(s): TPU (PVC-free), polypropylene, steel, nylon

Simple and durable, the BUCKET 45 rope bag allows you to store up to 185 meters of 11 mm diameter rope. It remains upright and keeps its shape, even when empty, for easy access to the inside of the bag. It has padded shoulder straps for comfort, an exterior pocket to store personal items, and a marking area for quick identification of the contents of the bag. Its construction of TPU tarp material allows regular to intensive use. Available in three colors: yellow, red, and black.

Specifications:

• Weight: 890 g
• Material(s): TPU, nylon, polyester, polypropylene
• Maximum load: 50 kg (according to the protocol for the EN ISO 21898:2006 standard)

One of the larger bags in our classic range, the Industrial Access Bag has a 55L capacity that can hold 220m of 10.5mm rope. The bag has a rectangular shape that makes for easy and space efficient packing in vehicles such as rescue vehicles and appliances. The shape also enables it to free stand and maintain an open top for easier filling. Ideally, this large volume transport bag is carried by two people via the hoop handles fitted on both sides, but it also has 2 adjustable shoulder straps should it need to be moved a short distance with a lighter load.

Specifications:

• Rectangular shape
• Heavy duty construction
• Draw cord closure with inner nylon sleeve
• 2 adjustable shoulder straps
• 2 large handles
• Capacity: 55L
• Rope Capacity: 220m of 10.5mm low stretch rope packed carefully
• Height: 59cm
• Base: 38 x 15cm
• Max Load: 25kg

Available in three sizes, the PAW rigging plate allows the organizing of the workstation and setup of multi-anchor systems. The hole design allows ropes or slings to be threaded for direct connection. Made of forged aluminum, it offers an excellent strength-to-weight ratio.

Specifications:

• Material(s): aluminum
• Certification(s): CE, NFPA 2500 General Use, UKCA
• Available: Small (36kN), Medium (36kN) & Large (50kN) - Breaking Strength

With its 10.5mm diameter and its unfailing robustness, it is the longstanding benchmark rope for work at height.

Specifications:

• Material - Polyamide
• Low Impact Force - 5.30 kN
• Breaking Load - 30.6kN
• Static Elongation - 2.9%

This high performance rope with its low impact force (7.4kN) and the record number of falls (11) it can withstand, already offered us excellent results and an optimal level of safety for peace of mind when climbing It is now reinforced by our UNICORE innovative technology which provides undeniable additional safety. This process consists of binding the core and sheath of the rope to prevent the potential slippage of the sheath and thus providing increased durability

Specifications:

• Diameter - 10.5mm
• Material - Polyamide
• Low impact Force - 7.5kN
• Dynamic Elongation - 37%
• Static Elongation - 9.5%

4mm cord for climbing. These 4 mm cords comply with the prerequisites of the International Climbing and Mountaineering Federation (UIAA) and the EN 564 standard.

Specifications:

• Diameter - 4mm
• Material - Polyamide
• Breaking Load - 180 daN (kg)

Lyon 11mm Dynamic Rope 50m - Our 11mm Dynamic single rope in a 50 metre length. Made by Beal for Lyon this Classic Dynamic rope has a low weight (for it's diameter) and take an impressive number of falls. Dynamic ropes must be used during certain procedures to absorb the energy of possible falls. This 11mm diameter rope is popular where traditional belay devices are used that require the use of larger, more traditional, diameter ropes.

Specifications:

A world first - designed in conjunction with the world's leading offshore operators the Rope Access 3D 275N is the only lifejacket of its kind available to date. Specifically designed for the offshore industry the Rope Access 3D 275N includes an array of unique key features to aid both the comfort and safety of those operating at height.

Specifications:

• Removable back strap for attaching fall arrest harness providing one complete safety solution
• Durable wipe clean cover
• EXOLOK to prevent the gas cylinder from becoming loose
• Foam padded cover for added impact protection
• Modular cover system allowing you to change the cover to suit your needs
• Unique bladder distribution for enhanced in-water performance
• Fitted with an array of features including a buddy line and beacon status indicator
• 2 x inspection zips for inflation mechanism and beacon status

Available in three versions (rod stock diameter of 10 mm, 8 mm, 8 mm with bar for positioning the CROLL on a harness), and also available in black.

Specifications:

• Material(s): Steel
• Certification(s): CE EN 362 type Q, EN 12275

Comfort foam for VERTEX and STRATO helmets Comfort foam (standard or absorbent), ready to install on headband of a VERTEX or STRATO helmet, to prolong its life.

Specifications:

• Weight: 15 g
• Material(s): polyethylene

The Rocker is a rope lock device used in rescue, rope access, rapid intervention and fixed rope sports climbing.

Specifications:

• Rope Compatibility - 10.5mm - 12.7mm
• Maximum Dynamic Load - 200kg
• Maximum Static Load - 350kg
• Conformity - CE EN358, CE EN12841 Type A, CE EN353-2

Double-layer construction gives the JET throw-bag excellent longevity. Its streamlined shape facilitates passage through tree branches. It is available in three versions: 250, 300 and 350 g.

Specifications:

• Color - Yellow
• Material(s): lead
• Available in 300 and 350g

The RP205 Ropegrab is fitted with a pip-pin axle, making it quick and easy to attach/detach mid-line. A thumb operated push-button is used to disengage the Pip-pin mechanism. The axle has a chamfered end, to allow for easy location of the pin.

Specifications:

• Rope diameter range (mm)14-16
• Finish - Anodised
• Approved Standard - EN567

KOOTENAY is a knot-passing pulley that allows passage of joining knots. The large diameter sheave mounted on sealed ball bearings ensures excellent efficiency.

Specifications:

• Rope compatibility: 8 to 19 mm
• Sheave diameter: 76 mm
• Ball bearings: yes
• Maximum working load: 5 kN x 2 = 10 kN
• Weight: 1390 g
• Height: 26 cm
• Certification(s): CE EN 12278, UKCA, XF 404: FZL-H-Q 9.5/16

Openable even when attached to the anchor, the SPIN L1 pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

Specifications:

• Weight: 290 g
• Certification(s): CE EN 12278, NFPA 2500 Pulley General Use, UIAA, UKCA, XF 494 : FZL-H-T9.5/13
• Material(s): aluminum, stainless steel, nylon
• Min. rope diameter: 7 mm
• Max. rope diameter: 13 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 38 mm
• Maximum working load: 4 x 2 = 8 kN
• Breaking strength: 36 kN
• Efficiency: 95 %

Openable even when attached to the anchor, the SPIN L2 is a double pulley designed for maximum simplicity when setting up hauling systems or tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

Specifications:

• Weight: 480 g
• Certification(s): CE EN 12278, NFPA 2500 Pulley General Use, UIAA, UKCA, XF 494 : FZL-H-T9.5/13
• Material(s): aluminum, stainless steel, nylon
• Min. rope diameter: 7 mm
• Max. rope diameter: 13 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 38 mm
• Maximum working load: 8 kN (3 kN per strand, more information in the Instructions for Use)
• Breaking strength: 36 kN
• Efficiency: 95%