Paint Inspection Kit | Elcometer |

Paint Inspection Kits


Paint Inspection Kit

Product Code: PIK-0001
Description: Elcometer Protective Coating Inspection Kit
Manufacturer: Elcometer

The Elcometer range of Protective Coatings Inspection Kits provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.


Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork


Kit Contents: -

  1. Testex Replica Tape - Coarse, 20 - 64μm (0.5 - 2.5mils)
  2. Replica Tape - X-Coarse, 38 - 115μm (1.5 - 4.5mils)
  3. Surface Profile Gauge
  4. Dewpoint Meter
  5. Hexagonal Wet Film Comb 25 - 3000μm (0 - 120mils)
  6. Burnishing Tool
  7. DFT Gauge

Concrete Inspection Kit

Product Code: PIK-0002
Description: Elcometer Protective Coating Inspection Kit
Manufacturer: Elcometer

The Elcometer 500 Coating Thickness Gauge accurately measures the thickness of coatings on concrete and other similar substrates* - non destructively.


Fast and accurate, the Elcometer 500 Coating Thickness Gauge takes repeatable and reproducible dry film thickness measurements of coatings on concrete up to 10mm‡ thick – without damaging the coating.

Taking over 60 readings per minute in standard mode and 140+ readings per minute in scan mode; the Elcometer 500 Coating Thickness Gauge allows users to inspect more coatings in less time. With a choice of intelligent, ergonomic probes, designed for continuous use and field replaceable probe tips you can inspect all day, everyday.

The built in signal strength indicator on the Elcometer 500 Coatings on Concrete Gauge prevents false or incorrect readings, as the gauge only displays the coating thickness measurement if the signal strength indicator goes green.

Robust, ergonomic and sealed against dirt and water, equivalent to a rating of IP54, the Elcometer 500 Concrete Coating Thickness Gauge has been designed to work in harsh environments.


Kit Contents: -

  1. Compatible with Elcometer Software & Elcometer Mobile App
  2. Fast - Measuring over 60 readings per minute in standard mode and over 140 readings per minute in scan mode
  3. Reliable - The Elcometer 500 will only display the coating thickness reading if the signal strength indicator turns green, preventing false or incorrect readings
  4. Accuracy - Elcometer 500 has a measurement accuracy of ±2%
  5. Operating Temperature - -10 to 50°C (14 to 122°F)
  6. Power Supply - 2 x AA batteries (rechargable batteries can be used)
  7. Battery Life - Alkaline: Approximately 15 hours Lithium: Approximately 28 hours
  8. Weight - 161g (5.68oz) including batteries, without transducer
  9. Dimensions - 141 x 73 x 37mm (5.55 x 2.87 x 1.46”) without transducer
  10. Probe Range C1 - Range1: 150 - 2,500μm (6 - 98mils) Accuracy2: ±2% or ±10μm (±2% or ±0.4mil)
  11. Probe Resolution C1 - Resolution: Low: 10μm, 0.01mm, 1mil or 0.001” High: 1μm, 0.001mm, 0.1mil or 0.0001”
  12. Probe Range C2 - Range1: 750 - 9,000μm (30 - 355mils) Accuracy2: ±2% or ±10μm (±2% or ±0.4mil)
  13. Probe Resolution C2 - Resolution: Low: 10μm, 0.01mm, 1mil or 0.001” High: 1μm, 0.001mm, 0.1mil or 0.0001”