Hammers & Mallets

Estwing's dead blow hammers have power from within through the movement of hundreds of steel shot for maximum power and control. Steel canister, with steel shot, and steel handle are completely encased in polyurethane, which is oil and chemical tolerant. Eliminates or minimizes denting and marring. Reduces swing fatigue, sting and vibration.

Product Specifications

• Steel encased in polyurethane
• Steel shot filled for maximum power
• Oil and chemical tolerant

Notes

• Protect your eyes from flying particles and dust.
• Always wear safety goggles.
• Bystanders shall also wear safety goggles.
• Only available in 18 oz.

Estwing's dead blow hammers have power from within through the movement of hundreds of steel shot for maximum power and control. Steel canister, with steel shot, and steel handle are completely encased in polyurethane, which is oil and chemical tolerant. Eliminates or minimizes denting and marring. Reduces swing fatigue, sting and vibration.

Product Specifications

• Dimensions - 44.2 x 18.6 x 9 cm
• Model - WF21
• Mass - 939g
• Smooth face
• Overstrike protection
• Smooth face to claw radius for easier nail pulling
• Shock resistant gasket
• Comfortable grip

Notes

• Protect your eyes from flying particles and dust.
• Always wear safety goggles.

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as Offshore, Earthmoving equipment, Shipping, locomotive assembly etc.

Product Specifications

• Manufactured from 99.9% Pure Electrolytic Copper rod
• Head Diameter - 38mm 1.1/2in
• Approx. Length - 310mm 12.1/4in
• Head Length - 89mm 3.1/2in
• Plastic handle
• Striking Material - Copper
• Weight 930g, 1.5lbs.

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as Offshore, Earthmoving equipment, Shipping, locomotive assembly etc.

Product Specifications

• Manufactured from 99.9% Pure Electrolytic Copper rod
• Striking Material - Copper
• Round Head Diameter - 32mm 1.1/4in
• Round Head Length - 82mm 3.1/4in
• Approximate Weight - 970g, 1.5lbs.
• Approximate Length - 280mm 11in

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as Offshore, Earthmoving equipment, Shipping, locomotive assembly etc.

Product Specifications

• Manufactured from 99.9% Pure Electrolytic Copper rod
• Striking Material - Copper
• Round Head Diameter - 38mm 1.1/2in
• Round Head Length - 89mm 3.1/2in
• Approximate Weight - 950g, 2.0lbs.
• Approximate Length - 310mm 12.1/4in

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as Offshore, Earthmoving equipment, Shipping, locomotive assembly etc.

Product Specifications

• Striking Material - Brass
• Round Head Diameter - 38mm 1.1/2in
• Round Head Length - 89mm 3.1/2in
• Approximate Weight - 930g, 2.0lbs.
• Approximate Length - 310mm 12.1/4in
• Spark Resistant

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as earthmoving equipment, shipping, locomotive assembly etc.

Product Specifications

• Manufactured from extruded Brass rod
• Striking Material - Brass
• Approximate Length - 405mm 16in
• Square Face Size - 44mm 1.3/4in
• Square Head Length - 114mm 4.1/2in
• Approximate Weight - 1890g
• Spark Resistant

Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as earthmoving equipment, shipping, locomotive assembly etc.

Product Specifications

• Manufactured from extruded Brass rod
• Striking Material - Brass
• Round Head Diameter - 32mm 1.1/4in
• Round Head Length - 82mm 3.1/4in
• Approximate Length - 300mm 11.3/4in
• Approximate Weight - 670g, 1.5lbs.
• Spark Resistant

Ideal for carpentry or around the house work.

Product Specifications

• Forged steel head and hickory shaft
• Polished and lacquered head and claw
• Varnished handle for water and dirt resistance
• For fixing and removing nails
• Dimensions - 13.2" x 1.2" x 5.1"
• Mass - 1.0lbs.

Ideal for removing nails from scaffold boards offshore, carpentry or around the house work.

Product Specifications

• Rubber Grip
• Spark Resistant
• Plastic Handle
• Mass - 1.1 lbs.

Ideal for scaffolding using Cuplock materials & Offshore use, where non sparking tools are required.

Product Specifications

• Rubber Grip
• Fibre Glass Handle
• Spark Resistant
• Solid Brass
• Mass - 2.5 lbs.
• Handle Length - 12"
• Heavy non-spark striking face with soft impact
• Malleable brass material will not fracture or create shards when striking hard surfaces