System Scaffold

Scaffmart - H-Frames


Scaffoldmart Set
Product Code: SMP0001
Description: Scaffmart 5' X 3' Set w/ 7' Bracing

The 5' X 3' set is perfect for working in areas where height is a concern. This set is commonly used in combination with our 5' X 5' sets to achieve the ideal height. Our 5' X 3' set meets and/or exceeds all OSHA regulations.The frames have one ladder rung and use our gravity flip locks. To maximize the life and longevity of our scaffold sets we apply a high visibility yellow powder-coating by the highly rated AkzoNobel..


Included:

  • (2) 5' X 3' Scaffolding Frames
  • (2) 7' Scaffolding Cross Braces
  • (4) Galvanized Stack Pins
  • (4) Zinc Plated Spring Rivets

Specifications:

  • Weight 82.90 lbs
  • Frame Tube OD 1.675"
  • Frame Tube Wall Thickness 2.3mm
  • Frame Dimensions 5' W X 3' H
  • Brace Lock Spacing 27.75"
  • Distance Between Frames 7'
  • Stack Pin Length 10"
  • Stack Pin OD 1.375"

Scaffoldmart Set
Product Code: SMP0002
Description: Scaffmart 5' X 5' Set w/ 7' Bracing

This set is a great entry level scaffolding set and is perfect for homeowners and DIY handymen. The frames has one ladder rung and uses our gravity flip locks. To maximize the life and longevity of our scaffold sets we apply a high visibility yellow powder-coating.


Included:

  • (2) 5' X 5' Scaffolding Frames
  • (2) 7' Scaffolding Cross Braces
  • (4) Galvanized Stack Pins
  • (4) Zinc Plated Spring Rivets

Specifications:

  • Weight 91.80 lbs
  • Frame Tube OD 1.625"
  • Frame Tube Wall Thickness 2.3mm
  • Frame Dimensions 5' W X 5' H
  • Brace Lock Spacing 27.75"
  • Distance Between Frames 7'
  • Stack Pin Length 10"
  • Stack Pin OD 1.375"

Scaffoldmart Set
Product Code: SMP0003
Description: Scaffmart Premium 5' X 6'-4" Set w/ 7' Bracing

This set is well suited for the homeowner who wants to build a tower over 20' and is okay with a heavier frame. The benefit to using this set over using the 5' X 5' set is cost. A 20' tower can be built with three sets of 6'4" tall vs four sets of 5' tall, saving around $100 in material cost. The disadvantage to using this frame is the weight. The 6'4" tall set weighs approximately 10 lb heavier than the 5' tall set. Our 5' X 6'4" set meets and/or exceeds all OSHA regulations.The frames have three ladder rungs and uses our premium c-locks. To maximize the life and longevity of our scaffold sets we apply a high visibility yellow powder-coating by the highly rated AkzoNobel.


Included:

  • (2) 5' X 6'-4" Scaffolding Frames
  • (2) 7' Scaffolding Cross Braces
  • (4) Galvanized Stack Pins
  • (4) Zinc Plated Spring Rivets

Specifications:

  • Weight 118.80 lbs
  • Frame Tube OD 1.675"
  • Frame Tube Wall Thickness 2.3mm
  • Frame Dimensions 5' W X 6'-4" H
  • Brace Lock Spacing 27.75"
  • Distance Between Frames 7'
  • Stack Pin Length 10"
  • Stack Pin OD 1.375"

Scaffoldmart Plank
Product Code: SMP0012
Description: Scaffmart 7' Aluminum Scaffold Plank

This product is designed in Eastern NC, and by beefing up the metal in just the right places we believe we offer the best value in aluminum scaffold plank in the country. This plank is tested to over 9,000 lb. in an independent third party load test. That's over 212 lb. per square foot with a 4-1 OSHA safety factor. To be safe the label reads 75 lb. per square foot.

These planks feature zinc-plated bolts with nylon backing nuts rather than rivets, and have wind latches on both ends for safety..


Included:

  • (1) 7' Aluminum Scaffold Plank

Specifications:

  • Weight 27.90 lbs
  • Length (Centers of Hooks) 84"
  • Width 19.25"
  • Height 2.75"

Scaffoldmart Baker
Product Code: SMP0014
Description: Scaffmart 28.5" x 6' Premium Bakers Frame

This frame is great for working small areas as it is is only 26.5" wide. The frames meet and/or exceed all OSHA regulations. The frames have four ladder rungs and uses premium c-Locks. To maximize the life and longevity of our scaffold frames we apply a high visibility yellow powder coat.


All of our frames feature the following:

  • Cope welds for increased strength and rigidity. We scallop our horizontal frame tubing so that it hugs it's vertical support, then weld the entire circumference for maximum weld contact and strength.
  • For life and longevity, we apply a highly rated AkzoNobel powdercoat for strength and rigidity.
  • Increased end tab length on brace lock tabs compared to competitors.

Included:

  • (1) ScaffoldMart's Narrow Bakers Frame
  • (2) Stainless-Steel Stack Pins
  • (2) Zinc-plated Spring Rivets

Specifications:

  • Weight 29.00 lbs
  • Tube Outside Diameter 1.625"
  • Tube Wall Thickness 2.3 mm
  • Frame Dimensions 28.5" W X 6' H
  • Brace Lock Spacing 27.75"

Scaffoldmart Baker
Product Code: SMP0004
Description: Scaffmart 7' Deluxe Safety Package w/ Toe Board

The ScaffoldMart Deluxe Safety Rail Package is one of the safest and most convenient in scaffolding safety equipment. These packages consist of our Deluxe Safety End Panels and our Deluxe Double Safety Rails, essentially a four piece configuration. That should give you an idea of the rigidity.


Included:

  • (2) Deluxe Safety End Panels with Safety Chains and Toe Boards
  • (2) 7' Deluxe Double Safety Rails
  • (2) 7' Toe Boards
  • (4) Span Pins
  • (4) Pig Tails

Specifications:

  • Weight 92.94 lbs

Scaffoldmart Outrigger
Product Code: SMP0015
Description: Scaffmart Scaffold Outrigger

What is an outrigger? It's a triangular bracket that clamps to the bottom of a scaffold tower or system to increase the base width, in order to increase the stability of the tower. Two very nice built-in clamps allow you to clamp the scaffold outrigger to the base tube of the scaffold, and the end has a tube that will accept either a level jack, socket leveler, or caster wheel. Very high quality in powder coated yellow. RADIAN also stocks a huge “Jumbo” outrigger for those that want to upgrade to the largest and very best.

The duty rating has been dramatically upgraded by increasing the diagonal tube to the same size as a scaffold frame vertical. 1.625 in/42mm x .090 in/23 mm. We have also added another mid bar. Use this to increase the safety of your tower when increasing the height needed. Or use this when you want to increase the stability of your lower tower. This outrigger increases the base width by a whopping 5 full ft.


Included:

  • One set Scaffold Outrigger or Jumbo

Specifications:

  • Weight 14.10 lbs

Scaffoldmart Grousser Bar
Product Code: SMP0006
Description: Scaffmart Grousser Bar 3 in 1

Use our bar to stabilize the bottom of a rolling tower. Fits diagonally from one side to the directly opposite or diagonal side. Bar fits around the vertical scaffold frame tube and a slider bar slides towards the end locking the bar to the scaffold frame. Slider bolt can further be tightened locking the bar in place. Slider and hardware are galvanized and bar is powder coated hi-visibility yellow.


Included:

  • One Grousser Bar

Specifications:

  • Weight 13.20 lbs

Scaffoldmart Level Jack
Product Code: SMP0008
Description: Scaffmart Level Jack

Our level jack is a solid-steel 24" threaded rod welded to base plate at a right angle. Allows for individual adjustment of each leg to help create a level working platform. Precision square acme threads and a massive 9.5" wing-nut which provides increased leverage for ease of adjustment under load. Finally this product is zinc galvanized for longevity.


Included:

  • (1) Scaffolding Level Jack 1 3/8" OD

Specifications:

  • Weight 11.85 lbs

Scaffoldmart Caster Jack
Product Code: SMP0009
Description: Scaffmart Caster Jack

Our caster jack is a solid-steel 22" threaded rod welded to a female receiver that accepts either our scaffolding caster wheels or base plates. Allows for individual adjustment of each leg in conjunction with a scaffolding caster wheel allowing your scaffold to roll on uneven surfaces. Can additionally be converted to a level jack when used with a base plate in place of the caster wheel.


Included:

  • (1) Caster Jack

Specifications:

  • Weight 13.20 lbs
  • Cold-dip zinc galvanized

Scaffoldmart Swivel Jack
Product Code: SMP0016
Description: Scaffmart Swivel Jack 1 3/8" OD

Our swivel jack is a solid-steel 24" threaded rod welded to base plate accept the T on the end of the threaded rod, allowing base plate to swivel. This allows for individual adjustment of each leg and on surfaces with too high a degree of incline for a level jack.

Our swivel jack is a solid-steel 24" threaded rod attached to a swiveling base plate. Where a level jack is welded perpendicular to it's rod, the swiveling action of this unit allows setup on an inclined surface. Provides for individual adjustment of each leg to help create a level working platform. Precision square acme threads and a massive 9.5" wing-nut provides increased leverage for ease of adjustment under load. Finally this product is zinc galvanized for longevity.


Included:

  • (1) Swivel Jack 1 3/8" OD

Specifications:

  • Weight 14.40 lbs

Scaffoldmart Caster Wheel
Product Code: SMP0010
Description: Scaffmart 8" Caster Wheel

The stem of this caster wheel is 1 3/8" OD (#6 tube) with a 4" length. It has a double safety margin built into the load rating. The wheel is heavy duty, load tested to handle 500 pounds with a 8-to-1 safety margin.


Included:

  • (1) 8" Cast-Iron Scaffolding Caster Wheel

Specifications:

  • Weight 11.55 lbs

Scaffoldmart Hoist Assembly
Product Code: SMP0013
Description: Scaffmart Hoist Swing Arm Assembly

Our hoist arm assembly attaches to the top of a frame by sliding down over a stack pin and a lower brace assembly fitting snuggly up with a horseshoe pin assembly. The assembly attaches down below the stack pin area and adds support at 2 different load points. Simply pin or clip the bottom and unit is ready to use. Unit includes safety rail studs to attach safety rails. Mid section of arm assembly has angle iron brace reinforcement. 360 degree pivot of top swing arm. Max capacity 100 lbs.

This unit is for material use only. Never lift personnel with it. Cordon off below when unit is in use to prevent injury to personnel or death. Pulley has a rope guide to prevent rope from coming off groove in wheel. Pulley is cast iron and swivel hook has safety lock to keep wheel attached to swing arm. Throw of the arm is approximately 19 inches. Diameter of the pulley wheel is 13 inches. Hoist Arm Assembly is not compatible with the deluxe rail package. Please remember that installing a Hoist Arm/Pulley Assembly can alter the center of gravity or your scaffold or tower.To avoid a topple condition we highly recommend that you always install tie bars when using a Hoist Assembly.


Included:

  • (1) Swing Arm Assembly Unit

Specifications:

  • Weight 43.95 lbs

Scaffoldmart Cross Brace
Product Code: SMP0020
Description: Scaffmart Scaffolding Cross Brace 7' X 27.75"

Cross braces galvanized entirely, for maximum longevity. The cross brace tubes are dipped before manufacture, so that the entire inside is coated.


Included:

  • (1) Pair Scaffolding Cross Brace

Specifications:

  • Weight 10.05 lbs

Scaffoldmart Stack Pin
Product Code: SMP0018
Description: Scaffmart Stack Pin - 1.375" OD

Our stacking pin measures 1.37" outer diameter on either end and 9" long. Each end has a hole for pinning to the frame both on the top and the bottom. The scaffold pin has a 1" collar in the middle, and the collar is brad installed. The ends are tapered for an easy fit, and these stackpins are galvanized for longevity.


Included:

  • (1) Scaffolding Stack Pin - 1.375" OD

Specifications:

  • Weight 1.00 lbs
  • Overall Length 9"
  • Collar Length 1"
  • Outside Diameter 1.375" (1 3/8")